Novel Materials Processing By Advanced Electromagnetic Energy Sources Proceedings Of The International Symposium On Novel Materials Processing By Advanced Electromagnetic Energy Sources March 1922 2004 Osaka Japan S Miyake Auth by S. Miyake (auth.) 9780080445045, 0080445047 instant download after payment.

Content:
Preface, Pages xv-xvi
Local Organizing Committee, Page xvii
Smart processing development of novel materials for electromagnetic wave control, Pages 3-9
A review of cluster ion beam process technology, Pages 11-18
Structural control of nanocarbon materials by novel plasma processing, Pages 21-27
Amorphous carbon film deposition by magnetically-driven shunting ARC discharge, Pages 29-34
RF sheet-plasma source using permanent magnets, Pages 35-38
Deposition uniformity of pulsed vacuum arc ion source, Pages 39-43
Thermal properties of gravity-free gas-arc discharge measured in a jet plane and its application to nano-tube production, Pages 45-48
New method for measuring ion energy in pulsed vacuum arc, Pages 49-53
Relationship between H−/D− production and plasma parameter control with magnetic filter in volume negative ion sources, Pages 55-58
Novel method to increase energy density of arc plasma jet, Pages 59-62
Material coating using electromagnetically accelerated plasma jet, Pages 63-66
Process control of carbon nanotube formation using RF glow-discharge plasma in strong magnetic field, Pages 67-70
Development of ARC discharge method, in organic solvents for the formation of DNA encapsulated carbon nanotubes, Pages 71-74
Effects of spruttering due to ion irradiation on plasma anisotropic CVD of Cu, Pages 75-78
2Evaluation of contribution of higher-order silane radicals in silane discharges to Si-Hbond formation in a-Si:H films, Pages 79-82
Nanometer-ranged metallic coatings by noble pulsed cathodic arc deposition, Pages 83-86
Preparation of hard carbon films by MCECR plasma sputtering method, Pages 87-90
Micro- and millimeter-wave processing of advanced materials at Karlsruhe Research Center, Pages 93-98
Simultaneous use of different high frequency energy sources for material processing, Pages 99-104
High power submillimeter wave radiation sources-gyrotron FU series, Pages 105-109
What type of transport phenomena can be induced by microwave field in solids and how these phenomena contribute to materials processing, Pages 111-117
Powerful electron beams for cyclotron resonance devices, Pages 119-124
Quasi-stationary electro-thermal heating model for microwave/hybrid-processed materials using greens function techniques, Pages 125-128
Aerospace CFRP structure fabrication with the 2.45 GHz hephaistos system, Pages 129-133
Optimization of slotted waveguides for 2.45 GHz applicatiors using novel slot types, Pages 135-138
The role of high pressure plasma in microwave sintering processes, Pages 139-142
Heating behavior of slags in 2.45GHz microwave applicator, Pages 143-146
Rapid heating by single-mode cavity controlled at 6GHz, Pages 147-150
Millimeter-wave dielectric measurement of SiC powders as a basis of millimeter-wave sintering of ceramics, Pages 151-154
Boron carbide ceramics sintering by using 24 GHz compact gyrotron, Pages 155-158
Instrumented millimeter wave sintering of mechanically alloyed amorphous ceramic powdears for bulk nanocrystalline synthesis, Pages 159-162
Millimeter-wave effect on sintering of silicon nitrides by 28GHz millimeter-wave radiation, Pages 163-168
Mechanical evaluation for silicon nitride sintered by 28GHz millimeter-wave heating, Pages 169-172
Intergranular microstructure of Yb2O3-added AIN sintered by millimeter-wave heating, Pages 173-176
All solid state high power lasers for materials processing, Pages 179-184
Effect of surface orientation on characteristic weld microstructure evolution of Ni-base superalloy single crystal, Pages 185-188
Modification of hydroxyapatite crystallization using CO2 laser, Pages 189-191
Synthesis of Ti-Fe-O thin films prepared by pulsed laser deposition, Pages 193-196
Oxidation behavior of TiN and Ti-Ni-N-O thin films prepared by pulsed laser deposition, Pages 197-201
Oxidation properties of Cr(N,O) thin films synthesized by pulsed laser deposition, Pages 203-207
Laser ablation processing of solid surfaces immersed in water, Pages 209-212
Penetration welding of plastics using a tunable CO2 laser with a transparent heat sink, Pages 213-216
Exprimental study of cluster size effect with size-selected cluster ion beam, Pages 219-222
Development of the large current cluster ion beam technology, Pages 223-226
Gas cluster ion beam source for secondary ion emission measurements, Pages 227-230
Surface structure dependence of impact processes of gas cluster ions, Pages 231-234
High quality thin film formation with gas cluster ion beam assisted deposition system, Pages 235-239
Morphology dependence of surface smoothing of Ar gas cluster ion beams, Pages 241-244
Comparison of irradiation effects between cluster and monomer for DLC film deposition, Pages 245-248
CO2 laser annealing of Pb(Zr,Ti)O3 aerosol-deposition film on stainless-steel-sheet, Pages 249-252
Infrared thermography: An introductive thermal history study in aerosol deposition, Pages 253-256
Surface modification of nanoparticles by mechanical milling with glow discharge, Pages 257-260
Synthesis of fine ferrite particles from powder mixtures by using well-controlled thermal plasmas, Pages 261-264
Electrical field enhancement of compaction and super-plastic deformation of ceramics, Pages 267-273
Mechanical properties of binderless WC produced by SPS process, Pages 275-279
Homogeneity of porous metals prepared by pulsed electric current pressure-sintering, Pages 281-284
Preparation of composite dielectric ceramics by spark plasma sintering method, Pages 285-288
Sintering behavior of metallic and ceramic powders during pulsed electric-current sintering process, Pages 289-292
Spark plasma sintering of Cu-TiB2 nanocomposite, Pages 293-296
Production of Nd-Fe-B magnets by spark plasma sintering, Pages 297-300
Pulse current pressure sintering of Al/Al2O3 functional graded material, Pages 301-304
Discharge phenomena and effect of pulse condition in pulsed current sintering, Pages 305-308
Microstructure and thermoelectric properties of ZnO ceramics prepared by the polymerized complex and SPS methods, Pages 309-312
Pulsed electric-current press bonding of aluminum alloy to stainless steel, Pages 313-316
Synthesis of NaxCo2O4 thermoelectric oxide by the polymerized complex method and sps methods, Pages 317-320
Mechanical properties of SiC/Ti-15V-3Cr-3Sn-3Al composites by spark plasma sintering, Pages 321-324
Dielectric properties of Pb(Zr,Ti)O3 ceramics prepared by pulsed electric current sintering, Pages 325-328
In-situ observationn of alloy phase formation in isolated nanometer-sized particles, Pages 331-337
Progress and application of nano-surface engineering in China, Pages 339-343
Nanocomposite coatings with enhanced hardness, Pages 345-356
High-strength SiC matrix production with polymeric techniques, Pages 357-360
SiC nanowires with in-situ carbon coating by CVG process, Pages 361-364
Hydrogen absorbing films prepared by ion beam assisted deposition, Pages 365-368
Fabrication and fracture toughness of SiC nanowires/tyranno-Sa/SiC composite, Pages 369-372
Low-temperature synthesis of superhard Ti-Si-N nanocomposite films, Pages 373-376
Preparation of Fe2VAl compound using MA-PCS process and the thermoelectric property, Pages 377-380
Oxidation resistance of sintered chromium nitride composite, Pages 381-384
Finite element analysis of SiC/SiC composite joints by using a new interface potential, Pages 385-388
Finite element analysis of surface texture of substrate on local damage of hard coating under sliding contact, Pages 389-392
Recent research on flattening behavior of thermal sprayed particle onto flat substrate surface, Pages 395-400
Formation and physical properties of Cr base alloy by sputtering, Pages 401-405
The development of nano-photocatalytic TiO2 coatings by thermal spraying, Pages 407-410
Nitride reinforced tial formed by reactive low pressure plasma spraying, Pages 411-414
Influence of surface roughness on room temperature adhesional bonding, Pages 415-418
Microstructure control for joining advanced stainless steel, Pages 419-422
Auger analysis of (Al, Ti)N/Si interface synthesized by ion beam assisted deposition and optimization of film formation factors, Pages 423-426
Research of TiN coatings by means of gas tunnel type plasma reactive spraying, Pages 427-432
Simultaneous chromizing-siliconizing diffusion coating on austenitic stainless steel, Pages 433-436
Ternary nitride films synthesized by cathodic arc method, Pages 437-440
The atomic structure of amorphous carbon films, Pages 441-445
Rapidly solidified titanium aluminide-based composite deposits with dispersed nitride particles produced by reactive plasma spraying, Pages 447-450
Effect of ultrasonic wave on the morphorogy of fracture surface of alumina/copper brazing, Pages 451-453
Author index, Pages 455-458