Selway Fisher Micro 8 Boat Yacht Sailboat Plan Plans A Paul Fisher by Paul Fisher instant download after payment.

Build the plywood with fiberglass ?
OK how ?
buy 170 grams/square meter of glass fiber,
lay on the oiled flat plywood and cut and wet with polyester
when set , build the THIN micro 8 with them.
Than apply 2 kilograms of rowing and 2.5 kilograms of polyester on DUMMY boat hull.
carry daily 2000 calories or 700 grams of food daily , carry 1 liters of water daily.
use food and water as your keel weight. You need lots of keel weight at that boat.
If you use s glass and s glass suitable polyester , above is approved by designer.
If you use e glass - read lot cheaper - and e glass suitable polyester , you must use least % 40 more .
use copper powder + epoxy resin as your anti fouling.
Support bottom and rudder and mast area well.
Use 5 cms thick wooden pieces to support the boat well.
Tighten the weight below well.
Always carry two times more food and water than your calculation.
You can insulate the top and sides with polyurethane foam againts the cold and sun.
If you dont have money to build boat safely , dont build the boat , collect money.